Commands list

×Contents and search
EXPAND ALL SORT A-Z

CONTACT_ACCURACY

Contact and tied interfaces

*CONTACT_ACCURACY
"Optional title"
coid, entype, enid, accuracy_level, accuracy_edge

Parameter definition

Variable
Description
coid
Command ID
entype
Entity type
options: G, P, PS, ALL
enid
Entity identification number
accuracy_level
Accuracy level
options:
1 $\rightarrow$ low
2 $\rightarrow$ standard
>2 $\rightarrow$ high
default: 2
accuracy_edge
Flag to activate increased accuracy at sharp edges
options:
0 $\rightarrow$ standard accuracy
1 $\rightarrow$ increased accuracy

Description

This command is used to locally increase the accuracy of the contact calculations. The specified levels will overrule lower accuracy levels specified in CONTACT.

Example

Locally increased contact accuracy

The contact accuray is locally increased for the part with ID=11.

*UNIT_SYSTEM SI *TIME 0.01 # # --- MESH --- # *INCLUDE "first" sub.k 1, 1, 1 0, 0, 0, -0.03, 0, 0 *INCLUDE "second" sub.k 1, 1, 1, 0, 0, 10, 10, 10 0, 0, 0, 0.03, 0, 0 # # --- CONTACT --- # *CONTACT "all to all" 1, 1 ALL, 0, ALL, 0, 0.1 *CONTACT_ACCURACY "second washer" 2, P, 11, 2 # # --- GRAVITY --- # *LOAD_GRAVITY Z, 1 *FUNCTION 1 9.81 *END

Included file sub.k:

# # --- MESH --- # *COMPONENT_PIPE "washer" 1, 1, 1, 16, 1 0, 0, 0, 0, 0, 0.001, 0.006, 0.01 *COMPONENT_BOX "left block" 2, 2, 1, 1, 1 -0.0295, -0.01, -0.02, -0.0095, 0.01, 0.0 *COMPONENT_BOX "right block" 3, 2, 1, 1, 1 0.0095, -0.01, -0.02, 0.0295, 0.01, 0.0 *CHANGE_P-ORDER ALL, 0, 2 *SMOOTH_MESH ALL, 0, 45.0 # # --- MATERIAL --- # *MAT_ELASTIC 1, 7800.0, 210.0e9, 0.3 *MAT_RIGID 2, 7800.0 # # --- PART --- # *PART "washer" 1, 1 "block" 2, 2 # # --- BC --- # *BC_MOTION "block" 1 P, 2, XYZ, XYZ *END