INITIAL_STATE_HAZ
Initial conditions
*INITIAL_STATE_HAZ
entype${}_{weld}$, enid${}_{weld}$, entype${}_{base}$, enid${}_{base}$, cid${}_{sigy}$, cid${}_{D0}$
entype${}_{weld}$, enid${}_{weld}$, entype${}_{base}$, enid${}_{base}$, cid${}_{sigy}$, cid${}_{D0}$
Parameter definition
Variable
Description
entype${}_{weld}$
Weld entity type
enid${}_{weld}$
Weld entity ID
entype${}_{base}$
Base material entity type
enid${}_{base}$
Base material entity ID
cid${}_{sigy}$
Description
This command is used to define mechanical properties in a HAZ after a welding operation. Initial yield stress and damage are defined as functions of the distance from the weld. The yield stress can be accessed in FUNCTION through the built in variable sigy0.
